Wednesday Sportsman JK Box Stock
- JK Cheetah C21 chassis (4") Weights and/or vibration-dampening tape may be attached to the top side of the chassis as desired. Chassis may not be otherwise altered or modified other than typical flattening and straightening
- The maximum rear track width is 3.25”
- Minimum track clearance, under the chassis at the rear of the motor box and under the spur gear, is .047”
- Armature shaft may be trimmed on the pinion end for tire clearance.
- Motors may be soldered in place
- MAR605 Eagle or Hawk 7 motors only (no bearings). Retro Eagle/Hawk motors are not allowed
- 10/36 gear combo only. Must be JK gears (purple for 36)
- JK OEM bodies only (no Ultimate Peugoet bodies). Bodies may be trimmed only for appropriate tire and track clearance. Bodies may be reinforced with tape and/or Lexan body armor. Front tires or front wheel stickers are mandatory
- Any guide flag is allowed
- Rear bushings/oilites only. No bearings. Original bushings can be replaced with any brand bushing
- Any guide flag is allowed. Guide spacers are allowed. Cut down guide flags are allowed
- Any guide wire is allowed
- Any braid type is allowed
- Open tire, no drilled hubs
